Fritz Aquatics Ammonia Test Kit
Fritz Aquatics Ammonia Test Kit
- Accurate in both fresh and saltwater
- Must-have for every aquarist
- Essential during new tank setup
Ammonia is one of the most important parameters to monitor in aquariums because any amount can be toxic to livestock if it is not addressed right away. Ammonia is commonly elevated in new tanks while establishing the beneficial biological filter. High ammonia can also be present in established aquariums from lack of maintenance, overstocking, or when the bio filter has been interrupted by medication. Ammonia can reach lethal levels very rapidly, and should be tested immediately in the case of fish illness or death. Monitor ammonia levels closely when using any medications or treatments. The ammonia level in any tank should ideally always be at 0 ppm.
Specs
- Brand: Fritz Aquatics
- Tests: up to 130
- Weight: 0.17 lb (approx.)
- UPC: 080531040010
Directions
To remove childproof safety cap, push down while turning. Do not allow test solutions to get into the aquarium. 1. Fill a clean test tube with 5 mL of water to be tested (to the line on the tube). 2. Add 8 drops from Ammonia Test Solution Bottle #1, holding the dropper bottle upside down in a completely vertical position. 3. Add 8 drops from Ammonia Test Solution Bottle #2 the same way. 4. Cap the test tube and shake for 5 seconds. 5. Wait five minutes for the color to develop. 6. Read the test results by matching the color of the solution against the Ammonia Test Color Chart included in the box. Freshwater and saltwater results vary slightly.
In stock in Pompano Beach — order online for local pickup at 2301 NE 16th St, Suite 103. Questions? Call (954) 782-4028.