aquavitro balance – 350 mL
aquavitro balance – 350 mL
A frequent occurrence in reef systems is low pH, while calcium and alkalinity are at optimal levels. Raise one and the others may fall. One of the primary reasons for this is an improper carbonate/bicarbonate ratio. The buffer ratio changes as a natural consequence of the buffer's ability to counteract acidifying sources such as organic acids (produced naturally from waste) or introduced from non-pH controlled husbandry products. In this case, adding more buffer would unnecessarily result in a rise in alkalinity and a drop in calcium. The first product of its kind, balance ends this see-saw effect. It resets this ratio by converting bicarbonate into carbonate in order to reassert a higher pH without affecting calcium level.
Specs
- Brand: aquavitro
- Mfg. part #: 7511
- Size: 11.8 Fluid Ounces (350 mL)
- Weight: 0.83 lb
- Dimensions: 2.12 x 2.12 x 7.69 in
- UPC: 000116751100
Directions
balance is intended to be used to raise pH when all other parameters (alkalinity, calcium, magnesium) are at optimal levels, but pH is still low. The amount of balance needed to raise pH to the desired level will vary widely, depending upon the buffering capacity and quality of your tank water. For reference purposes only, 5 mL will raise 55 L (15 US gallons) of salt water by about 0.1 pH units. Add balance in small increments, and check pH after at least 3 minutes before adding additional increments. balance can be used daily and within minutes of calcification, eight.four, and ions.
In stock in Pompano Beach — order online for local pickup at 2301 NE 16th St, Suite 103. Questions? Call (954) 782-4028.