Seachem Reef Builder – 300 g

Seachem Reef Builder – 300 g

$7.99
Skip to product information
Seachem Reef Builder – 300 g

Seachem Reef Builder – 300 g

$7.99

Seachem Reef Builder – 300 g

Reef Builder raises carbonate alkalinity without immediately impacting on pH. With long term use there will be a tendency to stabilize at pH 8.3. Carbonates and calcium are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. To prevent this you must provide carbonates (Reef Builder) and calcium (Reef Advantage Calcium or Reef Complete). Used as directed, Reef Builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity. Reef Builder and Reef Buffer may be used together. Use Reef Builder to raise carbonate alkalinity without affecting pH. Use Reef Buffer to raise carbonate alkalinity and pH. Reef alkalinity should be maintained at 3-5 meq/L (8-14 dKH). Alkalinity should not be allowed to fall below 2 meq/L. DO NOT OVERDOSE: Excess alkalinity may enhance the loss of calcium, magnesium, and strontium. Do not directly mix with any calcium, magnesium, or strontium supplement. Best if calcium & carbonate additives are added on alternate days or at least 30 minutes apart. Contains carbonate, bicarbonate, chloride, and sulfate salts of sodium, magnesium, calcium, strontium, and potassium. Each gram contains a minimum of 12 meq of alkalinity.

Specs

  • Brand: Seachem Laboratories
  • Mfg. part #: 366
  • Size: 10.6 Ounces (300 g)
  • Weight: 0.86 lb
  • Dimensions: 2.44 x 2.44 x 4.81 in
  • UPC: 000116036603

Directions

Beginner: Use 3 g (1/2 level teaspoon) per 150 L (40 US gallons) twice a week. Dissolve in at least 250 ml (1 cup) of freshwater. Check alkalinity every 2 weeks and adjust amount or frequency accordingly. For precise dosing, use the Seachem Digital Spoon Scale. Advanced: Check alkalinity (use MultiTest Marine pH & Alkalinity to test alkalinity levels), then follow addition regimen above until alkalinity is adjusted to 3-6 meq/L (8-17 dKH). Each 3 g/150 L will raise alkalinity by about 0.25 meq/L. Quantity or frequency can be adjusted, but do not exceed 12 g/150 L per day. Thereafter, use as required to maintain alkalinity.

In stock in Pompano Beach — order online for local pickup at 2301 NE 16th St, Suite 103. Questions? Call (954) 782-4028.

You may also like